Construction Methods

Slab On or Below Grade

Tubing embedded in a concrete slab poured on or below grade. Tubing is fastened to under slab insulation with plastic foam staples or tied to wire mesh or rebar. View Installation PDF »

RetroPanel On Existing Slab

Tubing placed in the RetroPanel. ¾" RetroPanel floats on top of existing concrete. View Installation PDF »

Suspended Slab

Tubing embedded in a concrete slab poured on a suspended structural slab or decking. Tubing is fastened to under slab insulation with plastic foam staples or tied to wire mesh or rebar. View Installation PDF »

Suspended Gypsum Underlayment

Tubing embedded in a layer of poured gypsum underlayment. Tubing is fastened on top of the subfloor with staples. Insulation placed in joist cavity beneath the subfloor. View Installation PDF »

Suspended Aluminum Plates On Top

Tubing is placed in omega aluminum heat transfer plates. Aluminum plates are attached to ¾" thick wood sleepers or plywood fastened on top of the subfloor. Insulation placed in joist cavity beneath the subfloor.View Installation PDF »

Suspended Aluminum Plates Below

Tubing is placed in C-Fin extruded aluminum heat transfer plates. Aluminum plates are attached underneath the subfloor. Insulation placed in joist cavity beneath the subfloor.View Installation PDF »

Snowmelt - Slab On Grade

Tubing embedded in a concrete slab poured on grade. Tubing is fastened to under slab insulation with plastic foam staples or tied to wire mesh or rebar.View Installation PDF »

Snowmelt - Pavers On Grade

Tubing embedded in a sand layer with pavers on top. Tubing is fastened to high density insulation with plastic foam staples or tied to wire mesh or rebar.View Installation PDF »